Hewlett Packard Enterprise FlexNetwork 5130 24G POE+ 2SFP+ 2XGT (370W) EI Managed L3 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) 1U Grey

SKU
JG940A#ACC
In stock
AED6,926.80 AED6,596.95
-
+
Overview
FlexNetwork 5130 24G POE+ 2SFP+ 2XGT (370W) EI Switch
The HPE 5130 EI Switch Series delivers flexibility, scalability and low TCO at the access layer of medium and large enterprise campus networks. The series offers enterprise class QoS and security, Hewlett Packard Enterprise Intelligent Resilient Fabric (IRF) stacking, static layer 3 routing and RIP, convenient fixed 10GbE uplink ports, PoE+, ACLs, IPv6 and delivers energy savings with Energy Efficient Ethernet. The 5130 EI Switch Series can be managed with HPE Intelligent Management Center (IMC) for a single view of your entire network. Features Scalable and Flexible Access Layer Switches - The HPE 5130 EI Switch Series delivers flexibility, scalability and low TCO at the access layer of medium- and large-enterprise campus networks. The 5130 supports stacking, fixed 10GbE ports, static layer 3 routing and RIP v1/v2, PoE+, ACLs, IPv6 and power savings with Energy Efficient Ethernet. - Intelligent Resilient Fabric (IRF) virtualizes up to nine physical switches into one logical device for simpler, flatter, more agile networks. - Four fixed 10GbE uplinks (SFP+ and 10GBASE-T) deliver performance for bandwidth intensive applications. - Includes Software-defined Network (SDN) capabilities with OpenFlow 1.3 support for future proofing your network. - Limited Lifetime Warranty and no software licensing required. Improved Quality of Service with Traffic Management - The HPE 5130 EI Switch Series supports advanced classifier-based QoS which groups traffic using multiple match criteria based on Layer 2 and 3 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or entire switch. - Provides traffic prioritization with supported congestion actions include: strict priority (SP) queuing, weighted round robin (WRR), weighted random early detection (WRED), and SP+WRR and traffic policing with Committed Access Rate (CAR) and line rate. - Reduce unwanted network traffic with broadcast control allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic. Comprehensive Security Control - The HPE 5130 EI Switch Series supports flexible authentication methods including 802.1X and MAC Authentication for greater security and policy-driven application authentication. Per-user access control lists (ACLs) provide identity-driven security and access control. - ACLs provide IP Layer 2 to Layer 4 traffic filtering; supports global ACL, VLAN ACL, port ACL, and IPv6 ACL. - Security with encryption of access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3, and other features including DHCP protection, IP source guard, dynamic ARP protection and RADIUS/HWTACAS. Single View of the Network - The HPE 5130 EI Switch Series can be seamlessly managed with HPE Intelligent Management Center (IMC) to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management. - RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.
More Information
SKU JG940A#ACC
EAN 0888182608494
Specification
Ports & interfaces
Copper ethernet cabling technology10BASE-T, 100BASE-TX, 1000BASE-T
SFP+ module slots quantity2
Basic switching RJ-45 Ethernet ports quantity24
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Console portRJ-45
Virtual LAN features
VLAN supportYes
Performance
Packet buffer memory1.5 MB
StackableYes
Physical stacking (units)9
Memory typeSDRAM
Internal memory1024 MB
Flash memory512 MB
Technical details
Physical stacking (units)9
Form factor1U
Product colourGrey
StackableYes
Rack mountingYes
Management features
Switch typeManaged
Web-based managementYes
Quality of Service (QoS) supportYes
Switch layerL3
Network
Auto-sensingYes
Copper ethernet cabling technology10BASE-T, 100BASE-TX, 1000BASE-T
Networking standardsIEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Full duplexYes
VLAN supportYes
IP routingYes
Flow control supportYes
Auto MDI/MDI-XYes
10G supportYes
Data transmission
Throughput96 Mpps
Latency (1 Gbps)5 µs
Latency (10 Gbps)1.5 µs
Packet buffer memory1.5 MB
MAC address table16384 entries
Switching capacity128 Gbit/s
Jumbo frames supportYes
Security
Access Control List (ACL)Yes
DHCP featuresDHCP server, DHCP client
Memory
Packet buffer memory1.5 MB
Memory typeSDRAM
Internal memory1024 MB
Flash memory512 MB
Design
Form factor1U
Product colourGrey
StackableYes
Rack mountingYes
Power
Power supply includedYes
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)425 W
Power sourceAC
Power over Ethernet (PoE)
Total Power over Ethernet (PoE) budget370 W
Power over Ethernet (PoE)Yes
Operational conditions
Storage temperature (T-T)-40 - 70 °C
Storage relative humidity (H-H)5 - 95%
Operating temperature (T-T)-5 - 45 °C
Operating relative humidity (H-H)10 - 90%
Weight & dimensions
Width440 mm
Depth360 mm
Height43.7 mm
Weight6 kg
Manufacturer HPE
Write Your Own Review
You're reviewing:Hewlett Packard Enterprise FlexNetwork 5130 24G POE+ 2SFP+ 2XGT (370W) EI Managed L3 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) 1U Grey
Search engine powered by ElasticSuite